| TOOLS |
< Back to Products |
| |
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| |
|
|
|
| For pricing or more information, log in to Dealer Tools or call us! |
> Page 3 |
|
| Screwdrivers |
TSI # / Part # |
Description |
 |
600-1 |
1/4" x 1-1/2" Keystone TIp, Cushion-Grip |
| KLE-602-4 / 602-4 |
1/4" x 4" Keystone Tip, Cushion-Grip |
| KLE-605-6 / 605-6 |
1/4" Cabinet TIp, 6" Shank, Cushion-Grip |
| 601-4 |
3/16" x 4" Cabinet TIp, Cushion-Grip |
| 601-6 |
3/16" x 6" Cabinet TIp, Cushion-Grip |
| 601-8 |
3/16" x 8" Cabinet TIp, Cushion-Grip |
| 600-6 |
5/16" x 6" Keystone TIp, Cushion-Grip |
| 603-1 |
#2 Philips Tip, 1-1/2" Shank, Cushion-Grip |
| 603-4 |
#3 Philips Tip, 4" Shank, Cushion-Grip |
| 603-6 |
#4 Philips Tip, 6" Shank, Cushion-Grip |
| |
| Nut Drivers |
Part # |
Description |
 |
KLE-S106M |
5/16" Hex, 6" Shaft, Magentic, Plastic Nut Driver |
| KLE-S86M |
1/4" Hex, 6" Shaft, Magnetic, Plastic Nut Driver |
| 631 |
Klein 7-piece Cushion-Grip Nut Driver Set Contains: 3/16", 1/4",
5/16", 11/32", 3/8", 7/16" and 1/2" hollow-shaft nut drivers, roll-up
plastic storage pouch |
| |
| Pliers |
Part # |
Description |
 |
HD502-10 |
10" Adjustable Pliers - Heavy Duty Handles |
| HD502-12 |
12" Adjustable Pliers - Heavy Duty Handles |
| D203-6 |
6-5/8" Long-Nose, Side Cutting |
| D240-6 |
6-1/16" DIagonal Cutting |
| D201-8NE |
8-1/2" Side Cutting |
| |
| Adjustable Wrenches |
Part # |
Description |
 |
D506-4 |
4" Adjustable Wrench |
| D507-6 |
6" Adjustable Wrench |
| D507-8 |
8" Adjustable Wrench |
| KLE-D507-10 |
10" Adjustable Wrench |
| D507-12 |
12" Adjustable Wrench |
| |
| Hex Wrenches |
Part # |
Description |
 |
70591 |
9 Key Folding Hex Set |
| KLE-BLK12 |
12 Piece Ball-End Fractional Hex Key Caddy Set |
| |
| Electrical Tools |
Part # |
Description |
 |
KLE-11045 |
10-18 Wire Stripper/Cutter, * Strips 10 to 18 AWG solid wire,
easy-to-read gauge, comfortable handles w/cushion ridges |
| KLE-1011 |
Multi-purpose WIre STripper/Cutter *Strips 10 to 20 AWG wire, bend,
shapes, pulls and loops wire, coil-spring |
| KLE-1010 |
Long-Nose All Purpose Tool, *Strips and cuts wire, crimps insulated
and non-insulated connectors from 10 to 22 gauge, crimps 7-8mm
ignition terminals, cuts bolts, pulls, loops, and bends wire. |
| |
| All Purpose Tools |
Part # |
Description |
 |
KLE-928-25HV |
High-Visibility Power-Return Tape |
| 930-9 |
Aluminum Torpedo Level |
| KLE-44100 |
Retractable-Blade Utility Knife |
| 44101 |
5-pack of Utility Knife Blades |
| |
|
Select-A-Bit™
Multi Driver Set |
Part # |
Description |
 |
DA74000 |
(KSB16) Multi-Driver Ratchet Set (set of 12) |
| |
|
Metalmaster®
Compound Action
Snips |
The non-slip serrated jaws of Wiss Metalmaster snips are made of extra tough and wear-resistant special molybdenum steel to provide the extra service demanded by the compound lever action and to withstand the sever strain of cutting heavy stock or tight curves. The handles are formed of special high strength and have a margin of strength far above the limit of the hand power that can be exerted. |
 |
Part # |
Description |
| SM1R |
M-1R- Cuts left from tight curves to straight; 9-3/4" overall length;
1-3/8" length of cut; 18 gauge steel - 0.049" recommended max |
| SM2R |
M-2R- Cuts right from tight curves to straight-green-grips; 9-3/4"
overall length; 1-3/8" length of cut; 18 gauge steel-0.049"
recommended max |
| SM3R |
M-3R- Cuts straight (or wide curves left or right in light stock)-yellow
grips; 9-3/4" overall length; 1-1/2" length of cut; 18 gauge steel-
0.049" recommended max |
| |
Metalmaster®
Compound Action
Bulldog Snips |
For notching or trimming extra heavy stock |
 |
Part # |
Description |
| SM5R |
M-5R- Curves to straight, red grips; 9-1/4" overall length; 7/8" length of cut; 18 gage steel-0.65" recommended max capacity low carbon |
| |
Metalmaster®
Offset Snips |
Offset blades keep material away from hands, allow straight or circle cuts to be made
easily. Color coded handles for easy blade identifications, red grips circle left, green
grips circle right. |
 |
Part # |
Description |
| SM6R |
Red grips, circle left; 9-1/4" overall length; 1-3/8" cut length; 18 gage
steel - 0.049" recommended max cap. low carbon |
| SM7R |
Green grips, circle right; 9-1/4" overall length; 1-3/8" cut length; 18
gage steel - 0.049" recommended max cap. low carbon |
| |
Metalmaster®
Special Series Snips |
Metalmaster special series snips are specially hardened for unusual industrial
requirements such as cutting today's space-age metals, like inconel, stainless steel and
titanium. |
 |
Part # |
Description |
| SM1RS1 |
Blue grips, cuts left; 9-3/4" overal length; 1-3/8" cut length; 18 gage
steel- 0.049" recommended max cap. low carbon |
| SM2RS1 |
Blue grips, cuts right; 9-3/4" overal length; 1-3/8" cut length; 18 gage
steel- 0.049" recommended max cap. low carbon |
| |
| Bulldog Pattern Snips |
Bulldog snips provide greater cutting power for notching, nibbling and chopping heavy
stock. Cushion grip red handles for comfort and better grip. |
 |
Part # |
Description |
| SW5 |
W-5, 16-1/2" overall length; 2-1/2" cut length; 16 gage steel -0.065"
recommended max cap. low carbon |
| |
| Repair Parts for Snips |
Part # |
Description |
| SP406 |
Replacement Spring for M1, M3, M5, M7R |
| SP407 |
Replacement Spring for M2, M6R |
| |
|
| Tubing Cutters |
Part # |
Description |
 |
#40617 |
#101 Midget Cutter with Spare Wheel (1/4" - 1-1/8") |
| #32985 |
#104 MIdget Cutter (3/16" - 15/16") |
| #31622 |
#150 Enclosed Feed Cutter (1/8" - 1-1/8") |
| #31632 |
#151 Quick-Acting Cutter (1/4" - 1-5/8") |
| #31642 |
#152 Quick-Acting Cutter (1/4" - 2--5/8") |
| |
Replacement
Cutter Wheels |
Part # |
Description |
 |
#33185 |
#E3469 Cutter Wheel: Aluminum, Copper |
| #33190 |
#e4546 Cutter Wheel: Steel - SS |
| |
Straight Pipe
Wrenches |
Part # |
Description |
 |
#31020 |
14" |
| #31025 |
18" |
| |
Aluminum Pipe
Wrenches |
Part # |
Description |
 |
#31090 |
10" |
| #31095 |
14" |
| #31100 |
18" |
| #31105 |
24" |
| |
Thread Cutting
Coolant |
Part # |
Description |
 |
30693 |
Thread Cutting Coolant 1 Qt. |
| |
|
| Bellhanger Bits |
Part # |
Description |
 |
S48137125 |
1/4" x 12" |
| S48137218 |
3/16" x 18" |
| S48137225 |
1/4" x 18" |
| S48137237 |
3/8" x 18" |
| S48137325 |
1/4" x 24" |
| |
| Self Feed Bits |
Part # |
Description |
 |
S48251001 |
1" |
| S48251251 |
1-1/4" |
| S48251371 |
1-3/8" |
| S48251501 |
1-1/2" |
| S48251751 |
1-3/4" |
| S48252001 |
2" |
| S48252121 |
2-1/8" |
| S48252251 |
2-1/4" |
| S48252561 |
2-9/16" |
| S48253001 |
3" |
| S48253621 |
3-5/8" |
| |
Self Feed
Bit Extension |
Part # |
Description |
 |
S48284006 |
12" Self Bit Extension |
| |
Feed Screw
Coarse Thread |
Part # |
Description |
 |
S48286870 |
Feed Screw Coarse Thread |
| |
| Step Drill Bits |
Part # |
Description |
 |
S9100 |
1/8" to 1/2" |
| S9105 |
1/4" to 3/4" |
| S9115 |
1/4" to 7/8" |
| S48899135 |
1/4" to 7/8" to 1-1/8" |
| |
4/6 Super-Tough®
Bi-Metal Hole Saws |
Part # |
Hole Dia Size |
Depth of Cut |
 |
S49560081 |
1-1/2" 38mm |
1-1/2" |
| S49560116 |
2" 51mm |
1-1/2" |
| S49560126 |
2-1/8" 54mm |
1-1/2" |
| S49560131 |
2-1/4" 57mm |
1-1/2" |
| S49560146 |
2-1/2" 64mm |
1-1/2" |
| S49560180 |
3-1/4" 83mm |
1-1/2" |
| S49560190 |
3-1/2" 89mm |
1-1/2" |
| S49560195 |
3-5/8" 92mm |
1-1/2" |
| S49560200 |
3-3/4" 95mm |
1-1/2" |
| S49560210 |
4" 102mm |
1-1/2" |
| S49560235 |
4-3/4" 1212mm |
1-1/2" |
| S49560250 |
6" 152mm |
1-1/2" |
| |
| Hole Saw Arbors |
Part # |
Shank / Thread |
For Hole Saw Diameters |
 |
S49566950 |
1/4" Round / 1/2" - 20 |
9/16" - 1-3/16" |
| S49567010 |
3/8" Hex / 1/2" - 20 |
9/16" - 1-3/16" |
| S49567055 |
7/16" Hex / 5/8" - 18 |
1-1/4" - 2" |
| S49567140 |
7/16" Hex / 5/8" - 18 |
1-1/4" & up |
| |
Hole Saw Arbor
Pilot Drills |
Part # |
Fits Milwaukee Arbors |
 |
S49568000 |
48-56-6950, 48-56-7000, 48-56-7055, 48-56-7130, 48-56-7140 |
| S49568010 |
48-56-7010 & 48-56-7150 |
| |
High Performance
Sawzall® Blades
(Wood) |
Part # |
Fits Milwaukee Arbors |
 |
S48005041 |
4/6 teeth, 6" Length, 5pk, Standard Wood |
| S48005031 |
5/8 teeth, 6" Length, 5pk, Standard Wood |
| S48016031 |
5/8 teeth, 6" Length, 50pk, Standard Wood |
| S48005021 |
5/8" teeth, 6" Length, 5pk, The AX™ |
| S48005026 |
5/8" teeth, 9" Length, 5pk, The AX™ |
| S48005027 |
5/8" teeth, 12" Length, 5pk, The AX™ |
| S48005012 |
6 teeth, 6" Length, 5pk, The Wood™ |
| S48005035 |
6 teeth, 6" Length, 5pk, Standard Wood |
| S48005036 |
6 teeth, 9" Length, 5pk, Standard Wood |
| S48016036 |
6 teeth, 9" Length, 50pk, Standard Wood |
| S48005037 |
6 teeth, 12" Length, 5pk, Standard Wood |
| |
Super-Tough®
Bi-Metal Sawzall
®Blades |
Part # |
Fits Milwaukee Arbors |
| |
S48005162 |
10 teeth, 3-5/8" Length, 5pk |
| S48005182 |
14 teeth, 6" Length, 5pk |
| S48005282 |
14 teeth, 6" Length, 50pK |
| S48005284 |
18 teeth, 6" Length, 5pk |
| S48005186 |
24 teeth, 9" Length, 5pk |
| |
General Purpose
Sawzall® Blades |
Super Sawzall® blades are made with Matrix II high speed steel teeth containing 8 percent Cobalt to keep a sharper tooth edge longer. The tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize per formance in specific cutting applications. Durable, long life blades are the goal of every blade we make. This blade has a 1/2 inch universal tang that fits all Sawzalls and s tandard competitive saws. Includes five individual blades. |
| |
Part # |
Fits Milwaukee Arbors |
| S48005091 |
8/12 Teeth, 6" Length, 5pk |
| S48005093 |
8/12 Teeth, 8" Length, 5pk |
| S48005094 |
8/12 Teeth, 12" Length, 5pk |
| S48005092 |
10 Teeth, 6" Length, 5pk |
| |
| Tool Accessories |
Part # |
Fits Milwaukee Arbors |
 |
S48301520 |
Bit #2 Phillips 1/4" Hex |
| S49900312 |
Bags 5 pak |
| |
| Call for pricing or more information. |
|
> Page 3 |
| |
|
|
|
