• Pul ls 75 micron vacuum o r better on 36 " hose
• 350 0 psi (2 41 bar ) minimum b urst, 90 0 psi ( 62 bar ) maximum working pressure
• Operating temperature -2 0° to 200° F (-28.8° to 93 .3°C)

• 4000 psi minimum burst and 800 psi maximum working pressure
• Color-coded 3 pk
• Moisture barrier provides improved resistance to moisture migration which
contaminates expensive refrigerant
• Nylon permeation barrier meets UL requirements

Features:
• Low loss anti-blowback SealRight fitting immediately traps refrigerant in the hose
when disconnected, helping meet non-venting regulations and prevent finger burns
• 45° end for ease in tight areas
• Gaskets resist deterioration from exiting CFC’s, plus new HFC refrigerants and oils
• Available with SealRight fittings on both ends
• New ball valve recommended for R-410A

Easy retrofit of existing Plus II hoses with flex flow adapter capabilities. Flexible hose
between valve and fitting for handling in tight areas.

Features:
• Permeation resistant Plus II barrier
• Operating temperature: -20° to 200°F
• Working pressure: 750 psi, 3000 psi burst

Replaces regular copper capillary tubing on failure cut out controls and refrigeration
pressure controls , saving you money. Also eliminates capillary failure due to work
hardening from vibration. Easy to install, long lasting. Works better than Teflon hose.
• 1/4" operates to 600 psi and 200°F

Now a smaller ball valve more compact- still features full flow. Metal valve handle, add
to hoses for charging and recovery. UL recognized assembly.

Innovative SealRight fittings automatically and immediately trap refrigerant in the hose
when disconnected, helping meet non-venting regulations and preventing finger burns.
One-piece attaches quickly, saving up to 50% in time compared to 2-piece quick
couplers. Works with or without Schrader core. Gaskets resist deterioration from CFC,
HCFC, HFC refrigerants, and new oils.

The only gaskets designed for optimum performance with Yellow Jacket® Charging
Hoses. Works with all refrigerants. Manufactured to strict tolerances to resist blow out.

• Quick, easy connect / disconnect.
• Control valve for access to systems even at working pressure.
• Integral safety sleeve holds coupler securely to se rvice port.
• Low profile for tight applications.

• Flutterless™ te chnology with surge protector minimizes the needle pulsation for
improved accuracy
• 1/8" NPT Male connection
• 3-2-3% accuracy
• Calibration traceable to NIST standards

• Unique thermal conductivity sensor automatically compensates for temperature
with no calibration
• Simple On/Off controls
• Easy-to-clean sensor handles 450 psi positive pressure
• Rugged construction with tough ABS housing and solid state circuitry for
accuracy
• Automatic battery saver shuts gauge off after 20 minutes with no reading
changes
• Low battery indicator

Forged body is solid brass for durability. Full por ting maximizes capacity. Metal valve
handles are full size for easy operation.

Series 41 manifolds are also available with larger, easier to read 3-1/8" color- coded
gauges in rugged steel cases with polycarbonate crystals. These gauges feature 1%
accuracy (Class 1) for an exact reading in critical charge sys tems.

The BRUTE II™ 4-Valve Test and Charging Manifold provides the flow that's proven
faster than any conventional manifold. The aluminum alloy body is forged for strength
and reliability with 3/8" bores through the body to speed the job.

Series 41 manifolds are also available with larger, easier to read 3-1/8" color- coded
gauges in rugged steel cases with polycarbonate crystals. These gauges feature 1%
accuracy (Class 1) for an exact reading in critical charge sys tems.

• Unique thermal conductivity sensor automatically compensates for temperature with no
calibration
• Simple On/Off controls
• Easy-to-clean sensor handles 450 psi positive pressure
• Rugged construction with tough ABS housing and solid state circuitry for accuracy
• Automatic battery saver shuts gauge off after 20 minutes with no reading changes
• Low battery indicator

Full range from atmosphere to 1 micron. The SuperEvac™ LCD vacuum gauge
combines thermocouple sensor technology with advanced electronics for precise
readings and repeatability not found with thermistor sensors or analog meters.

• Two Stage Rotary Vane
• ¼” and ½” Male Flare
• ½ HP and 1725 RPM
• 115 Volt – 60 cycle
• 8’ Motor Mounted Switch
• Field blank off- 15 microns

• Unique thermal conductivity sensor automatically compensates for temperature
with no calibration
• Simple On/Off controls
• Easy-to-clean sensor handles 450 psi positive pressure
• Rugged construction with tough ABS housing and solid state circuitry for
accuracy
• Automatic battery saver shuts gauge off after 20 minutes with no reading
changes
• Low battery indicator

Find every leak fast and sure, and know how big!
This is the only tool you need for fast, easy, and certain leak detection. The heated
sensor tip of the YELLOW JACKET® ACCUPROBE™ Leak Detector positively
identifies the leak source for all refrigerants. That includes CFCs such as R-12 and
R-502, HCFCs as small as 0.03oz./yr., and HFC leaks of 0.06 oz./yr., even R-404A and
R-410A. Frequency of flashes in the tip and audible beeping increases the closer you
get to the leak source. You ze ro-in and the exclusive Smart Alarm™ LED shows how
big or small the leak on a scale of 1 to 9. Maximum value helps you determine if the
leak needs immediate repair.

Eliminates refrigerant transfer from tank to cylinder to system. The cylinder with
refrigerant is weighed before and after charging. Charge directly into the system or
recover from the system.

The only full range 1/8" - 3/4" O.D. flaring tool avail. for copper, brass & alum. tubing.
• Automatic "tube height gauge" to ensure tubing height is correct each time for flaring.
• Self-centering flaring yoke. Bearings & cam allow burnishing action.
• Multi-faceted burnishing cone rolls out smooth polished flare seat that matches fitting.
• Jaws grip without marring or constricting tube.

Durable heat-treated and plated alloy steel tool expands one end of copper tubing for
connecting same size tubes.